Italian Manufacturer

Electric Motors and Pumps
ELECTRIC MOTORS
• For Steel Plants
• Special On Request
• Standard
CENTRIFUGAL ELECTRIC PUMPS
• PTh-T, single“in-line"
• ThD-T, twins “in-line”
• PMI-PMID, monoblock
• PI-PID free shaft
• PHO, multistage
• PDT
• POC
SELF-PRIMING ELECTRIC PUMPS
• PLDA horizontal - for dense liquids
• PLDV vertical - for dense liquids
• PAV vertical - liquid ring
• PDTA horizontal - liquid ring
SPECIAL EXECUTIONS
Company and Contacts
Home Page

PDT Horizontal Centrifugal Electric Pumps
FOR INDUSTRIAL/DOSING/IRRIGATION/DECANTING PLANTS
PDTa

TECHNICAL DATA

Flow rate: from 20 to 60 litres per minute

Head: up to 28 m

Liquid temperature: up to 80 °C

Operating pressure: up to 20 bar

Download Pdf Technical Sheet

MANUFACTURING

FICEM PDT series electric pumps and single-stage pumps with direct coupling and offset intake and elivery openings of different diameters, which are not standardised. The electric pumps are equipped with a three-phase and/or single-phase asynchronous electric motor, with external fan cooling, IP55 rating, class F insulation, 2RS oversized, self-lubricating ball bearings.

The pump shaft is connected to the motor directly, without joints, reducing vibration to a minimum. The whole range is available with pipe thread connections for quick coupling to the system piping, preventing any dripping or leaking of liquids.

The electric pumps se an unbalanced mechanical seal, supplied by a leading Italian manufacturer.

MATERIALS (standard version)
Components

Material
Pump body

Cast iron EN-GJL-250
Impeller

Cast iron EN-GJL-250 //
Pump shaft

Bronze CuSn5Zn5Pb
Motor/pump spindle

Stainless steel AISI 413
Mechanical seal

Cast iron EN-GJL-250
O-Ring

Carbon/Silicon carbide/EPDM - EPDM/NBR
MECHANICAL SEAL
Two types of unbalanced mechanical seal are available:
Type 3
The type 3 mechanical seal is an inexpensive, highperforming seal, with interchangeable components.
The standard Ceramic/Carbon pairing gives this type of mechanical seal a wide variety of uses, even with impure liquids.
The possibility to replace the wear rings minimises maintenance costs.
The metal components are made of stainless steel.
Type 5
The main characteristic of this mechanical seal is the ability to mount any type of elastomer. Furthermore, it is particularly suitable for heavy-duty uses such as the offsetting or misalignment of the structure in which it is used.
MECHANICAL SEAL SPECIFICATIONS
 

Tipo 3

Tipo 5

Shaftdiameters

from Ø10 to Ø16

from Ø10 to Ø16

Metal part

Stainless steel

Stainless steel or superalloy with anti-corrosion property

Fixed part

Carbon

Metallised carbon

Rotating part

Silicon carbide

Alumina ceramic

O-Ring

EPDM-NBR-WITON

Specific mechanical seals are available for liquids containing suspended abrasive particles.

 

CONNECTIONS

The whole range of FICEM PDT series electric pumps is available with pipe thread connections. Horizontal operation of the electric pump is envisaged.
ADJUSTMENT
In order to adjust performance on the basis of requirements, it is possible to use FICEM PDT series electric pumps, connecting them to control systems which provide continuous performance adjustments based on needs.
PRODUCT FEATURES AND ADVANTAGES

Optimised hydraulics
The geometry of the impellers and the pump bodies guarantees high levels of efficiency and reduced energy
consumption.
Highly efficient motors
The whole electric pumps production range uses excellent quality electric motors with the EFF2 class of efficiency.
Motors with class 2 efficiency (EFF2) guarantee reduced energy consumptions.
Ease of maintenance
If it is necessary to take the pump apart, it is extremely easy to take out the motor body, without having to disconnect the
pump body from the piping.
FICEM electric pump impellers are equipped with special threaded holes in order to facilitate their removal from the relative shafts.
Anti-corrosion treatment and final painting
All the components which come into contact with fluids in FICEM electric pumps are treated with a special corrosion inhibitor:


1. Pickling and alkaline cleaning of the components
2. Zinc phosphate primer
3. Two coats of epoxy paint (120µ)
4. Oven drying at 250 C°


On request, paints suitable for use in the naval and iron and steel sectors can be