| ELECTRIC MOTORS |
| • For Steel Plants |
| • Special On Request |
| • Standard |
| CENTRIFUGAL ELECTRIC PUMPS |
| • PTh-T, single“in-line" |
| • ThD-T, twins “in-line” |
| • PMI-PMID, monoblock |
| • PI-PID free shaft |
| • PHO, multistage |
| • PDT |
| • POC |
| SELF-PRIMING ELECTRIC PUMPS |
| • PLDA horizontal - for dense liquids |
| • PLDV vertical - for dense liquids |
| • PAV vertical - liquid ring |
| • PDTA horizontal - liquid ring |
| SPECIAL EXECUTIONS |
| Company and Contacts |
| Home Page |
PDTa Horizontal Self-Priming Centrifugal Electric Pump (with liquid ring)
FOR INDUSTRIAL/DOSING PLANTS |
|
MANUFACTURING
FICEM PDTa series self-priming electric pumps are single stage pumps with direct coupling and “in-line” intake and delivery openings of equal diameter. The electric pumps are equipped with a three-phase asynchronous electric motor (monophase up to 2.2 kW), with external fan cooling, IP55 rating, class F insulation, 2RS oversized, self-lubricating ball bearings.
The pump shaft is connected to the motor directly, without joints, reducing vibration to a minimum. The whole range is available with pipe thread connections for quick coupling to the system piping, preventing any dripping or leaking of liquids.
The electric pumps use an unbalanced mechanical seal, supplied by a leading Italian manufacturer.
The electric pumps have a removable motor so it is therefore possible to take out the motor/spindle/impeller for maintenance and/or repair purposes, without having to separate the pump body from the piping.
MATERIALS (standard version)
Material
Cast iron EN-GJL-250
Cast iron EN-GJL-250 //
Bronze CuSn5Zn5Pb
Stainless steel AISI 413
Cast iron EN-GJL-250
Carbon/Silicon carbide/EPDM - EPDM/NBR
The type 3 mechanical seal is an inexpensive, highperforming seal, with interchangeable components.
The standard Ceramic/Carbon pairing gives this type of mechanical seal a wide variety of uses, even with impure liquids.
The possibility to replace the wear rings minimises maintenance costs.
The metal components are made of stainless steel.
The main characteristic of this mechanical seal is the ability to mount any type of elastomer. Furthermore, it is particularly suitable for heavy-duty uses such as the offsetting or misalignment of the structure in which it is used.
Tipo 3
Tipo 5
Shaftdiameters
from Ø10 to Ø40
from Ø10 to Ø80
Metal part
Stainless steel
Stainless steel or superalloy with anti-corrosion property
Fixed part
Carbon
Metallised carbon
Rotating part
Silicon carbide
Alumina ceramic
O-Ring
EPDM-NBR-WITON
Specific mechanical seals are available for liquids containing suspended abrasive particles.
CONNECTIONS
The whole range of FICEM PDTa series electric pumps is available with pipe thread connections. Horizontal operation of the electric pump is envisaged.
Optimised hydraulics
The geometry of the impellers and the pump bodies guarantees high levels of efficiency and reduced energy
consumption.
Highly efficient motors
The whole electric pumps production range uses excellent quality electric motors with the EFF2 class of efficiency.
Motors with class 2 efficiency (EFF2) guarantee reduced energy consumptions.
Ease of maintenance
If it is necessary to take the pump apart, it is extremely easy to take out the motor body, without having to disconnect the
pump body from the piping.
FICEM electric pump impellers are equipped with special threaded holes in order to facilitate their removal from the relative shafts.
Anti-corrosion treatment and final painting
All the components which come into contact with fluids in FICEM electric pumps are treated with a special corrosion inhibitor:
1. Pickling and alkaline cleaning of the components
2. Zinc phosphate primer
3. Two coats of epoxy paint (120µ)
4. Oven drying at 250 C°
On request, paints suitable for use in the naval and iron and steel sectors can be