PHO
Multistage Horizontal Shaft
Centrifugal Pumps
FOR INDUSTRIAL/DOSING/IRRIGATION/DECANTING PLANTS
 |
|
MANUFACTURING
FICEM PHO series centrifugal pumps are multistage pumps with a horizontal shaft with motor Coupling by means of a flexible coupling; the intake body and the discharge casing offer the layout of the relative openings in a lateral or vertical position.
The pumps are supplier with bare shaft and equipped with a three-phase asynchronous electric motor on request, with external fan cooling, IP55 rating, class F insulation, 2RS oversized, self-lubricating ball bearings.
The whole range is available with flanged connections for quick coupling to the system piping, preventing any dripping or leaking of liquids.
The electric pumps use an unbalanced mechanical seal, supplied by a leading Italian manufacturer.
MATERIALS (standard version)
Material
Cast iron EN-GJL-250
Cast iron EN-GJL-250 //
Bronze CuSn5Zn5Pb
Stainless steel AISI 413
Cast iron EN-GJL-250
Carbon/Silicon carbide/EPDM - EPDM/NBR
The type 3 mechanical seal is an inexpensive, highperforming seal, with interchangeable components.
The standard Ceramic/Carbon pairing gives this type of mechanical seal a wide variety of uses, even with impure liquids.
The possibility to replace the wear rings minimises maintenance costs.
The metal components are made of stainless steel.
The main characteristic of this mechanical seal is the ability to mount any type of elastomer. Furthermore, it is particularly suitable for heavy-duty uses such as the offsetting or misalignment of the structure in which it is used.
Tipo 3
Tipo 5
Shaftdiameters
from Ø10 to Ø40
from Ø10 to Ø80
Metal part
Stainless steel
Stainless steel or superalloy with anti-corrosion property
Fixed part
Carbon
Metallised carbon
Rotating part
Silicon carbide
Alumina ceramic
O-Ring
EPDM-NBR-WITON
Specific mechanical seals are available for liquids containing suspended abrasive particles.
CONNECTIONS
The whole range of FICEM electric pumps is available with flanged connections and is equipped as standard with sets of nuts and bolts and PN16/40 threaded and/or weld-on counter flanges on request. The rotation of the outlet vent is envisaged.
Optimised hydraulics
The geometry of the impellers and the pump bodies guarantees high levels of efficiency and reduced energy
consumption.
Highly efficient motors
The whole electric pumps production range uses excellent quality electric motors with the EFF2 class of efficiency.
Motors with class 2 efficiency (EFF2) guarantee reduced energy consumptions.
Ease of maintenance
If it is necessary to take the pump apart, it is extremely easy to take out the motor body, without having to disconnect the
pump body from the piping.
FICEM electric pump impellers are equipped with special threaded holes in order to facilitate their removal from the relative shafts.
Anti-corrosion treatment and final painting
All the components which come into contact with fluids in FICEM electric pumps are treated with a special corrosion inhibitor:
1. Pickling and alkaline cleaning of the components
2. Zinc phosphate primer
3. Two coats of epoxy paint (120µ)
4. Oven drying at 250 C°
On request, paints suitable for use in the naval and iron and steel sectors can be